#42254 Thetford OTB1665 Sq Ft | 1 Bed | 2 Bath | 1 Story | Garage Spaces 2 | Width: 40'-0" Depth: 56'-0"
|Square footage||Plan Specifications||Main features||Architectural Styles|
|First Floor||1665||Width||40' 0"||Main Level||9' 0"||Stories||1||European|
|Second Floor||0||Depth||56' 0"||Second Level||0' 0"||Bedrooms||1|
|Total Heated||1665||Height||27 '-9"||Foundation||Unf. Bsmt.||Bathrooms||2|
|Garage||482||Exterior Walls||2 x 4||Garage Spaces||2|
|Main Level||9' 0"|
|Second Level||0' 0"|
Plan DescriptionSometimes referred to as a “reverse story-and-a-half,” The Thetford provides expansive main floor entertaining space as well as a main floor owner’s suite, with potential secondary bedroom(s) in the lower level. As opposed to entering directly into the great room from the stoop, you’ll appreciate this design’s entry foyer as you greet guests. Then it’s open entertaining, with the kitchen and casual dining behind. A hallway off the great room leads to the owner’s suite which presents two bathing options, private toilet area and a good-size walk-in closet. This home design is an ‘On the Board’ or OTB plan. As such, it is not completely drafted. Final finished square footages and dimensions may vary. Please contact our office to discuss your design needs and construction time table.
When you purchase a plan, you receive a Construction License that gives you certain rights in building the home depicted in that plan. Click here for more information.
CONSTRUCTION DRAWINGS (most plans)
Cover Page. Each home plan features the front elevation and informative reference sections including, general notes and design criteria*, abbreviations, and symbols for your plan.
Elevations. Scaled elevations for the front, rear, and sides are provided. All elevations are detailed and an aerial view of the roof is provided.
Foundations. Foundations are fully engineered for each design, whether slab or basement.
Main Level Floor Plan. The detailed drawings are fully dimensioned for ease of framing. Exterior wall thicknesses vary by plan. If necessary, contact Design Basics to clarify the standard exterior wall thickness for the plan(s) you are interested in.
Second Level Floor Plan. Dimensioned and drafted to the same degree of detail as the main level floor plan*.
Electrical and Sections. Illustrated on a separate page for clarity, the electrical plan shows suggested electrical layout for the main and second level floor plans. Typical wall and stair sections are provided to further explain construction of these areas.
Full technical support is provided to purchasers of each plan to answer your plan-related questions.
*Plans are drafted to meet the Uniform Building Code or IRC (International Residential Code) at the time they are designed (contact us for more information). Because codes and requirements can change and may vary from jurisdiction to jurisdiction, the designers cannot warrant compliance with any specific code or regulation. All plans can be adapted to your local building codes and requirements. It is the responsibility of the purchaser and/or builder of each plan to see that the structure is built in strict compliance with all governing municipal codes (city, county, state, and federal).